Dialer Watch is a vital part of your CCNA and CCNP studies, particularly for the BCRAN exam, but it’s one of the most misunderstood technologies as well. To help you pass the CCNA and CCNP certification exams, here’s a detailed look at Dialer Watch.
Dialer Watch allows you to configure a route or routes as “watched” when the watched route leaves the routing table and there is no other valid route to that specific destination, the ISDN link will come up. In the following example, R1 and R2 are connected by both a Frame Relay cloud over the 172.12.123.0 /24 network and an ISDN cloud using the 172.12.12.0 /24 network. The routers are running OSPF over the Frame cloud, and R1 is advertising its loopback of 1.1.1.1/32 as well as an Ethernet segment, 10.1.1.0/24, via OSPF. R2 has both of these routes in its OSPF table, as shown below.
R2#show ip route ospf
1.0.0.0/32 is subnetted, 1 subnets
O 1.1.1.1 [110/65] via 172.12.123.1, 00:00:07, Serial0
10.0.0.0/24 is subnetted, 1 subnets
O 10.1.1.0 [110/128] via 172.12.123.1, 00:00:08, Serial0
We want R2 to place a call to R1 if either the loopback or Ethernet networks...
To view and download this full PLR article, you must be logged in. Registration is completely free. Once you create your account, you will be able to browse, search & downlod from our PLR articles database of over "1,57,897+" on 1,000's of niches and 200+ categories without paying a penny. Click here to signup...
