DIY PC Build – PC Assembly Made Easy

DIY PC Build – PC Assembly Made Easy DIY PC Assembly Steps When you have the new PC components items available, next step is to Assemble the PC together. This is the most interesting part and also the most rewarding part when your system is up and running, all credits to Yourself!! Essential Tools required: 1) A screwdriver (Cross-shaped) Optional Recommended Items: 1) Torchlight (To illuminate hard to see areas) 2) Antistatic wrist strap (To discharge of any static charges) Lets start now. Firstly, discharge yourself of any static charges by touching the metal casing or attaching the other side of the antistatic wrist strap to the metal casing. 1) Open the case 2) Install the motherboard Find the motherboard standoffs that should have come with the case. Insert the I/O Shield that came with your motherboard. Now locate the screw holes on your motherboard and find the corresponding holes on the motherboard plate (or tray) in the case. Put a standoff in each of these holes on the tray and position the motherboard so that you can see the holes in the top of the standoffs through the screw holes in the motherboard. Now fasten a screw through each of the motherboard screw...