Cisco CCNP / BSCI Tutorial: Comparing OSPF and ISIS Hellos
While studying to pass the BSCI exam and preparing to earn your CCNP certification, you’ll quickly notice that while OSPF and ISIS are both link-state protocols, there are a lot of differences between the two. One major difference is the way the two protocols handle hello packets.
Hello packets are imperative to keeping OSPF and ISIS adjacencies alive. Since they are both link-state protocols, neither of them will send updates at any specified time. Hello packets are the only method by which routers running OSPF and ISIS can see that a neighboring router is still available.
OSPF gives us some great options when it comes to keeping routing table size down via the use of stub and total stub areas, but to OSPF, a hello packet is a hello packet. ISIS routers are capable of sending two different types of hellos – Level 1 and Level 2.
ISIS routers are classified as Level 1 (L1), Level 2 (L2), and Level 1-2 (L1-L2). By default, Cisco routers are L1-L2 routers; this means that every ISIS-enabled interface will send out both L1 and L2 hellos.
If one of the interfaces is...
To view and download this full PLR article, you must be logged in. Registration is completely free. Once you create your account, you will be able to browse, search & downlod from our PLR articles database of over "1,57,897+" on 1,000's of niches and 200+ categories without paying a penny. Click here to signup...
