Using A Drywall Sander

| Total Words: 473

f you plan on doing a drywall job, make sure you have the basic equipment handy. You need putty trial, a tray, sandpaper, joint putty and a scraper.

Start by sanding down the walls to remove any lumps or bumps. Then wipe down the walls to remove any of the sand left from sanding. You should be down to a base and see a clear white area. (This does apply to wood areas of the walls.)

If there are any holes in the walls, use putty trial and a scraper to fill them in. This may take a few coats, so keep repeating the process until the hole is completely filled in . Scrape it down completely smooth.

Then sandpaper the wall once again and wash it down to remove all of the dust. Let it dry completely.

Once you have taken these steps, you are ready for drywalling. The drywall kit will have all of the steps that you need to follow. Make sure you follow them closely.

Once the drywalling is done, paint the surface for the look and finish you want. You will need a few coats since this is bare wall that you are dealing with. Then you can rearrange the furniture and reinstall the curtains and any wall accents in the room

Be careful that the paint is...

To view and download this full PLR article, you must be logged in. Registration is completely free. Once you create your account, you will be able to browse, search & downlod from our PLR articles database of over "1,57,897+" on 1,000's of niches and 200+ categories without paying a penny. Click here to signup...

** PLR to VIDEO: Create Awesome Videos From PLR Articles... FAST!...